One of our most popular accessories are Travel Bug Skins, These funky additions to your Travel Bugs not only help protect them and other items in the cache, but also help your Travel Bug stand out and look cool. If your Travel Bug stands out, then it’s more likely to be picked up and moved on it’s way over other items in the cache. Skins are designed to stay on! lets face it, when you send your Bug out there you have no idea where it could end up… Because the fit is quite tight they can be a little tricky to fit the first time. Not a problem though as we have made a simple step-by-step guide to Travel Bug Skin happiness below * NOTE: If you order a Travel Bug with your Skin from us it will come already fitted for you. Step 1 The Travel Bug and Skin shown side by side. The Skin is designed to stay on the Travel bug securely and so provides a tight fit. Step 2 You need to align the hole of the skin with the hole of the Travel Bug. Step 3 Slot the Travel Bug between the two sides of the skin so you can see through the holes and the travel bug is sandwiched between the two sides of the skin. Step 4 Use your thumb hold the skin in position over the holes as you gently stretch one side of the skin over the first corner. Make sure the Travel Bug remains between the two sides of the skin. Step 5 Use your thumb again to hold the first corner in place while you gently stretch the second corner over the Travel Bug. Step 6 This can be a little tricky to ensure the Travel bug fits between the two sides of the skin. Step 7 Once the second corner is in your Travel Bug should be wearing a cool new skin which not only makes your Travel Bug stand out, but also helps protect it and other items in the cache. Once fitted correctly it should feel nice and snug around the tag